Industrial Fanless Embedded PC, WF-RK3588S, AndroidSBC, Munich

TL;DR: Industrial Fanless Embedded PC

LONGGANG, Shenzhen, September 10, 2026 - Wanlin Manufacturing Group confirmed the release of lot 239, a 30,665-unit run of WF-RK3588S boards destined for Munich, Germany, after the lot cleared the burn-in rack and the pre-shipment bench.

AndroidSBC benchmark note covering the WF-Series custom board line serving Munich, Germany. What Germany importers get from the WF-Series is platform breadth from one factory. Three Allwinner parts and four Rockchip parts sit under one part-number scheme, with two SOM modules for customers who design their own carrier. Wanlin builds all nine at Longgang in Shenzhen, and the export desk issues one certification pack per lot covering CE, FCC, UKCA, RoHS, and REACH.

About AndroidSBC and the Rockchip RK3588 Board Family

Wanlin Manufacturing Group is a Shenzhen board builder that has worked on Allwinner and Rockchip silicon for more than ten years, and AndroidSBC is the name it sells under overseas. The WF-Series is the current line: nine boards spanning Allwinner A133, H618, and T527 and Rockchip RK3588, RK3568, RK3566, and RK3288, with two SOM modules for customers who bring their own carrier. Production, test, and packing sit in one Longgang building, which is why the group can issue a per-lot Technical File instead of a generic declaration. Buyers in Munich and Germany usually arrive for one of three reasons: platform breadth, OEM branding capacity, or a supplier willing to carry the certification obligation.

WF-RK3588S Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588S (SOM Module and SMARC Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Germany importers sourcing the WF-Series, the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) variant is the typical configuration for the SMARC module and custom carrier integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing SOM Module and SMARC Carrier Board for Germany Buyers

Buyers in Munich who have run the som module and smarc carrier board category for a few years tend to stop shopping on price alone. The Rockchip RK3588 allocation is the real constraint, and it is the reason a 30,665-unit order can look cheap on paper and expensive in a slipped quarter. Then comes the firmware question. The hardware spec is straightforward to verify; whether the board holds a credential-locked stack through a 72-hour loop and a field OTA is a different test, and it is normally the Munich buyer's warehouse that discovers the answer.

Documentation is the third item on the list. A CE mark without a matching Declaration of Conformity and Technical File is not a marking problem, it is a customs problem, and it tends to surface after the goods are already on the water. AndroidSBC's approach is to close the gap at the factory gate. The certified stack is loaded on the Longgang line, the burn-in record is traceable per unit barcode, and the CE and FCC test reports are dated inside twelve months and shipped with the lot. The nine WF-Series boards span SMARC module design, COM Express Type 6 builds, edge AI boxes, video wall controllers, medical imaging terminals, autonomous vehicle compute, and bespoke industrial carriers, with three memory configurations per model for Munich buyers who need a standard SKU rather than a custom build.

For Germany specifically, the file travels with the goods. In Germany technical buyers ask for the full test report set rather than a declaration, and the GS mark is often requested on top of CE for consumer-facing product. AndroidSBC prepares the CE marking with BNetzA radio interface registration and the GS mark documentation for BNetzA, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Hamburg on the Hamburg to Yantian lane.

Competitive Comparison: WF-RK3588S vs Competing RK3588 Boards

Three families of board chase the same som module and smarc carrier board socket. The first is legacy silicon at a low price with no software certification, the second is Cortex-A55 hardware with certification but limited decode headroom, and the third carries both yet treats expansion as an afterthought. The WF-RK3588S belongs to the third family and separates itself on Rockchip RK3588, sustained display output under load, and a certified image burned per lot.

• vs proprietary SOM pin-outs: the SMARC 2.2 standard lets the carrier survive a module generation change without a re-layout.
• vs RK3568 SMARC modules: the RK3588 module adds 8K@60fps decode, PCIe 3.0 x4, and 6 TOPS NPU on the same 314-pin edge.
• vs x86 COM Express modules: the RK3588 module runs Android natively, which removes the OS licensing line from the BOM.
• vs module-only vendors: AndroidSBC ships the carrier reference design plus the signal integrity report with the module.

Global SMARC and COM Express Module Engineering Market Trends

Buyers in Munich are reading the SMARC and COM Express Module Engineering curve before they commit to an som module and smarc carrier board programme. Global Growth Insights reports the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, 2025-2035), used here as the Android silicon demand baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-Series in Germany:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588S board carries that headroom without a board change.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.

Analysts covering the SMARC and COM Express Module Engineering space point to the same pattern in Germany: order books are being built around platform breadth rather than a single part number.

The common thread in Germany is that single orders are being replaced by blanket agreements with a monthly release, because a programme that has to survive a twelve-month window cannot absorb an allocation gap in the middle of it.

Partner Success Story: Orion Transit Systems in Munich, Germany

Orion Transit Systems, a rail information systems contractor serving the Germany market, deployed 5,700 units of the WF-RK3568 board for platform information displays. The rollout covered the smarc module design, edge ai boxes, and autonomous vehicle compute workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 5,700 units of the WF-RK3568 board for platform information displays
• Region: Munich, Germany
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Hamburg via the Hamburg to Yantian lane

"Platform displays run 7x24 with no one watching. The watchdog and the scheduled restart on the RK3568 board mean our maintenance visits are scheduled, not reactive."

- James Whitfield, Programme Manager

Field Report: a retail chain signage refresh across Munich, where 30,665 units of the WF-RK3588S board replaced legacy players in store windows

Reporter Wei Tao, on the ground in Munich, Germany. Crews worked store by store overnight so trading hours were never interrupted. The WF-RK3588S boards took the estate content package on first boot and reported back to the CMS within the hour. The chain's marketing team re-cut the window loop at 4K once the fleet was live, because the old players had capped it at 1080p.

A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.

The inspection confirmed three things on the spot: the WF-RK3588S units hold the burn-in with a yield above 99.06 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with BNetzA radio interface registration and the GS mark administered by BNetzA, cleared for entry at Port of Hamburg on the Hamburg to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Germany importers can hand straight to their customs broker.

Filed by Wei Tao, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3588S Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3588S (SOM Module and SMARC Carrier Board) as the lead SKU for Munich and Germany programmes:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• COM Express Type 6 builds: WF-RK3588S maps to the Type 6 pin-out for existing x86 carriers.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.
• Video wall controllers: WF-RK3588S drives HDMI 2.1 and DP 1.4 out through the carrier.
• Medical imaging terminals: WF-RK3588S pairs PCIe 3.0 x4 with the carrier frame grabber.
• Autonomous vehicle compute: WF-RK3588S holds -40C to 85C on the automotive-grade carrier.
• Bespoke industrial carriers: WF-RK3588S ships the signal integrity report for the customer stack-up.
• Carrier bring-up: WF-RK3588S comes with the BSP port for the carrier revision.

Partnership Models for Munich Buyers

The WF-Series is available to Germany partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a Germany partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-RK3588S is the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: It depends on the platform, and AndroidSBC is explicit about the split. The WF-H618 carries the ATV 12 GMS build with Widevine L1 and Dolby Audio pre-burned at the factory. The WF-A133, WF-T527, and the Rockchip boards ship with an AOSP or Linux image by default, and a GMS build can be prepared for ODM partners who need Play Services in the field. Certification scope is agreed per project rather than assumed.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Germany?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any Germany-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a Germany partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-Series. Security patches are back-ported across the Android and Linux firmware tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. For POS and industrial programmes, the support commitment is written into the framework agreement rather than left as an understanding.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU, and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3588S unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-RK3588S Sourcing Conversation

Wanlin Manufacturing Group sells the WF-Series overseas through AndroidSBC. Munich and Germany importers, brand owners, and channel distributors who want to source the som module and smarc carrier board direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with BNetzA radio interface registration and the GS mark for Germany, administered by BNetzA, entering at Port of Hamburg on the Hamburg to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up an OEM or ODM review, include the target volume, the certification scope you need, and your preferred Incoterm. With those three in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.